Problem Solver
Painting Tips
Consumer Section
Contractor Section
Dealer Section

Flow/leveling failure

Back to interior problems...
Excessive brush or roller marks causing an unsightly non-uniform surface.

Flow/leveling probable causes - failures usually are the result of using wrong type or poor quality roller cover brush. Poor painting techniques. Repainting or touching-up partially dried areas brush/roller marks. Painting non-primed surfaces with varying porosity.

Flow/leveling solutions - proper surface preparation and application with a recommended Elder & Jenks roller cover or brush. Roller nap length should confirm the paint type being used. High quality brushes will minimize brush marks. Use Ultra Waterborne Finishes, which have excellent flow/leveling characteristics.

Priming and Interior finishes - priming is essential for better adhesion, sheen uniformity, mildew control and durability. Ask your Muralo dealer for the best Muralo interior paint for your project, in the color and sheen of your choice.